acceleration of video decoding in mplayer with creator Ci20

Tagged: 

This topic contains 9 replies, has 2 voices, and was last updated by  ZubairLK 1 year, 9 months ago.

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • #52635

    Ghofrane
    Member

    hello,

    How can I enable hardware acceleration of video decoding in mplayer with creator Ci20 ?

    thank you

    #52636

    ZubairLK
    Member

    Hi Ghofrane,

    Please see http://elinux.org/CI20_MPlayer for details on how to get mplayer working on Debian 7 images with kernel 3.0.8

    Regards,
    ZubairLK

    #52643

    Ghofrane
    Member

    hi,

    thank you , I did all steps but when i ran this line ” make ” I got this error
    collect2: ld returned 1 exit status
    make: *** [mplayer] Error 1

    regards

    #52645

    ZubairLK
    Member

    Hi Ghofrane,

    Are you running the Ci20 with a Debian 7 image flashed?

    Can you please repeat the steps?

    Did this error appear immediately, or after a while when many files had been compiled?

    Regards,
    ZubairLK

    #52655

    Ghofrane
    Member

    hi,
    thank you

    it ran well after using this line apt-get upgrade

    but why didn’t it display like this line with this version of mpalyer?

    A: 596.5 V: 596.4 A-V: 0.105 ct: 49.660 0/ 0 454% 253% 58.9% 1230 0

    #52688

    ZubairLK
    Member

    Hi Ghofrane,

    Glad you got it working.

    I’m not sure I understand your question.

    Please keep in mind.
    Ingenic is the manufacturer of the JZ4780 SoC on the Ci20.

    This mplayer is an old version with modified sources from Ingenic that allow hardware accelerated video decode to run on the jz4780.

    Regards,
    ZubairLK

    #52712

    Ghofrane
    Member

    thank you,

    this version of mpalyer supports VP8 and MPEG4 CODEC or not ?

    regards

    #52715

    ZubairLK
    Member

    Hi Ghofrane,

    The hardware in the JZ4780 does support VP8 and MPEG4.

    However, as I have stated earlier. The mplayer sources are from Ingenic.

    We don’t have comprehensive information on what level of support it provides.

    Please test it as per your requirements.

    Regards,
    ZubairLK

    #52716

    Ghofrane
    Member

    thank you,
    vp8 works well without hardware acceleration.
    but when I use Hardware acceleration I got this error

    MPlayer interrupted by signal 10 in module: demux_open
    – MPlayer crashed. This shouldn’t happen.
    It can be a bug in the MPlayer code _or_ in your drivers _or_ in your
    gcc version. If you think it’s MPlayer’s fault, please read
    DOCS/HTML/en/bugreports.html and follow the instructions there. We can’t and
    won’t help unless you provide this information when reporting a possible bug.

    #52717

    ZubairLK
    Member

    Hi Ghofrane,

    The mplayer code is from Ingenic.

    I’m afraid we cannot assist much regarding the video decode on the JZ4780.

    Regards,
    ZubairLK

Viewing 10 posts - 1 through 10 (of 10 total)
The forum ‘Creator Platforms’ is closed to new topics and replies.