MIPSfpga+: Connecting parts and running synthesis for Digilent Nexys 4 DDR

This topic contains 0 replies, has 1 voice, and was last updated by  Yuri 1 year, 9 months ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #52621

    Yuri
    Moderator

    The text and pictures below is an appendix to the main article MIPSfpga+ allows loading programs via UART and has switchable clock

    Copy at http://github.com/MIPSfpga/mipsfpga-plus/wiki

    Information about GPIO pin assignment:

    How to load a software example into mipsfpga-plus using BusBlaster and OpenOCD:

    cd C:\github\mipsfpga-plus\programs\00_counter
    02_compile_and_link.bat
    10_upload_to_xilinx_board_using_bus_blaster.bat
    

    How to load a software example into mipsfpga-plus using USB-to-UART-based serial loader:

    cd C:\github\mipsfpga-plus\programs\00_counter
    02_compile_and_link.bat
    08_generate_motorola_s_record_file.bat
    11_check_which_com_port_is_used.bat
    

    Modify 12_upload_to_the_board_using_uart.bat.

    12_upload_to_the_board_using_uart.bat
    
Viewing 1 post (of 1 total)
You must be logged in to reply to this topic.