FAQ: How to Register IUP and Get Access to the Materials

This topic contains 6 replies, has 6 voices, and was last updated by  Rose Li 1 year, 1 month ago.

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #49799

    Laurence
    Admin

    Join the IUP
    1. Click ‘Register’ or ’Join IUP’ on the landing page: http://www.imgtec.com/university

    2. Complete the first section: ‘the Community Registration’

    3. Tick the box marked ‘Join Imagination University Programme’ and completes the additional information

    4. A verification email will be sent to your inbox for activation.
    (Please also check your spam mailbox because occasionally the mail will got filtered)
    5. To download teaching materials, visit the IUP page – Teaching Resources https://community.imgtec.com/university/resources/
    Request the package(s) you want, accept the Licence Agreement, and give some details about how you plan to use the materials.

    6. We then receive a request to approve the download, and normally action this within 48 hours.
    Once approved, you will receive an e-mail saying you can now make the download.

    NOTE: Requests may be rejected for the following reasons:
    – the registration details are incomplete
    – there are few or no details of intended use
    – the requester appears to be a commercial company or a competitor

    加入Imagination公司的大学计划(IUP) 和获取教学材料
    1. 点击登录页面上的“Join IUP”或“Register”:www.imgtec.com/university
    2. 完成第一部分:“Community Registration”, 勾选标有“Imagination University Programme”的框并填写补充资料
    3. 验证邮件将发送到您的邮箱进行激活。 (请检查您的垃圾邮件,因为偶尔邮件会被过滤)
    4. 要下载教材,请访问IUP – “Teaching Resources”页面: https://community.imgtec.com/university/resources/ ,请求你想要的教学材料文档,接收受许可协议,然后告诉我们你将计划如何使用这些教材。
    5. 我们这边会收到一个批准下载的请求, 我们正常的话会在48小时内给与审批。一旦被批准,你将会收到一份邮件告诉你现在你可以去下载了。

    请注意:您的下载可能会因为以下的原因而被拒绝:
    – 注册信息不完整。
    – 没有或不足给出对教学材料的计划使用目的。
    – 请求者被发现是一个商业公司或者是一个竞争对手。

    #52790

    Denis
    Member

    Hello.
    I have a profile of the University , but still can not upload teaching materials. what am I doing wrong? Please look at my screenshot , there is no way to gain access .
    One time I was getting access to the Russian content . However, they contain little information . So I want to download materials in English . But unfortunately I have this problem. These materials are only planning to use for training.
    Thank you.

    Attachments:
    You must be logged in to view attached files.
    #52797

    Igor
    Member

    Hello!
    I’m from Russia and I can’t registering in University program, because I get message, that my e-mail ( ***@physics.msu.ru ) is invalid. This is University e-mail (Russia, M.V.Lomonosov Moscow State University, Faculty of Physics http://phys.msu.ru/eng). Help me please!!!

    Attachments:
    You must be logged in to view attached files.
    #52803

    “Community” and “University Programme” REGISTRATIONS – the difference:
    – The process has been simplified BUT you still need to complete BOTH the Community and the University sections.
    – If you have only registered a Community User Name and an e-mail, you will have access to the Forum and other items on the Community. But, if you try and request Teaching Resources like MIPSfpga, you will get a statement saying “Your Account type does not have access to ———-“.
    – If this happens, please go back to your profile, tick the box marked “Register for the University Programme”, a set of new fields drop-down, and you can then complete the extra details.
    – After this, you will be able to request the materials you want.

    Join the IUP
    1. https://community.imgtec.com/university/university-registration
    – Complete the Community Registration by choosing a user name (take care: lower case and only specific characters)
    – Tick the box for “University Programme”, and fill-in all your academic details
    – Submit registration
    2. You will then be sent a verification e-mail, and you can activate your account
    3. Visit the IUP page “Resources”: https://community.imgtec.com/university/resources/
    – Request the package(s) you want, accept the Licence Agreement, and give some details about how you plan to use the materials.
    4 We then receive a request to approve the download, and normally action this within 48 hours.
    – Once approved, you will receive an e-mail saying you can now make the download.
    NOTE: Requests may be rejected for the following reasons:
    – Registration details are incomplete
    – There are few or no details of intended use
    – The requester appears to be a commercial company or a competitor

    #53426

    Nicholas
    Member

    I have had access to the MIPSfpga materials and the MIPSfpga SOC, however I see that new releases have come out, and there does not appear to be a way of accessing them short of asking for permission all over again. I am currently using MIPSfpga materials for my graduate level computer architecture class at Johns Hopkins University. I would like to access the latest versions.

    I am also having problems getting the Bus Blaster working with the Nexys4 DDR board, and would like to get an email contact of someone who can offer advice to get around the problem.

    My email address is: nbeser1@jhu.edu

    Thank-you,

    Nick

    #53427

    Laurence
    Admin

    Hi Nick,
    The MIPSfpga Getting Started Package and Fundamentals package are now in v.1.3 ; Currently we don’t have plans to shorten the permission process, but thanks for your advice, we will evaluate internally. To access the update version, please request to download again with intended use to update the package

    For any Bus Blasters issue, please post on the MIPSfpga forum here: https://community.imgtec.com/forums/cat/mips-insider/mipsfpga/

    #54389

    Rose Li
    Member

    How to deal with “your account type of participant does not have access to…”?

    Why?
    – The process has been simplified BUT you still need to complete BOTH the Community and the University sections.
    – If you have only registered a Community User Name and an e-mail, you will have access to the Forum and other items on the Community. But, if you try and request Teaching Resources like MIPSfpga, you will get a statement saying “Your Account type does not have access to ———-“.

    How to solve it?
    -Please go to IUP Homepage https://community.imgtec.com/university/
    -Log-in using your current community account, click “Join IUP” under “University Programme” on the top
    -There will be a set of new fields drop-down where you can then complete the extra details.
    -After submitting your details, you will be able to download or request the materials you want.


    如何解决” Your Account type does not have access to ———-“?[/b]

    为什么?,
    -我们简化了流程但是您仍需要完成Community和University Programme的注册
    -如果您只注册了Community账户,您可以访问论坛及其他Community项目。但是,如果您想申请下载教学资源,比如MIPSfpga, 您将会看到” Your Account type does not have access to ———-“.
    如何解决?
    -您需要注册大学计划,请到IUP主页https://community.imgtec.com/university/
    -用您现有的Community账户登录,点击主页上方“University Programme”中的“Join IUP”
    -您需要填写一些信息
    -提交后,您将可以下载或申请下载您需要的资料

    Attachments:
    You must be logged in to view attached files.
Viewing 7 posts - 1 through 7 (of 7 total)
You must be logged in to reply to this topic.