FAQ: MIPSfpga Installation/Set up issue

This topic contains 0 replies, has 1 voice, and was last updated by  Laurence 2 years, 1 month ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #50292

    Laurence
    Admin

    Problem:
    I have only a 32bit Windows laptop. Since Vivado 2015.1 does not support 32bit Systems, I’m installing version 14.4. I hope that will be OK?

    Solution:
    Vivado 14.4 will be fine for the MIPSfpga onto the Nexys 4 DDR Board.

    However the 32-bit machine will be problematic using Imaginations’ Codescape SDK, which is used to compile the C code into Machine Code. This will be part of some of the Hands-on Sessions in our workshops.

    We suggest the following:
    – install Vivado 14.4 on your laptop so you can use Vivado.
    – use one of the machines in the Workshop to run the Codescape SDK.

Viewing 1 post (of 1 total)
You must be logged in to reply to this topic.