How do I add support for mice and keyboards?

This topic contains 1 reply, has 1 voice, and was last updated by  alastair 4 years, 10 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #31051

    alastair
    Moderator

    I want to use a mouse on my Minimorph, with output displayed on a monitor.

    #36354

    alastair
    Moderator

    You will need to use either a powered hub (so that the Minimorph is powered from this) and plug the mouse and keyboard into the hub, or you’ll need a separate 5V supply for the board.

    The USB cable connected to the Minimorph must be a a USB mini-A connector, so that the Minimorph is forced into USB host mode.

    The kernel will need recompiling with

    Device Drivers
    Input Device Support
    Mouse Interface

    Device Drivers
    HID Support
    Generic HID driver
Viewing 2 posts - 1 through 2 (of 2 total)
You must be logged in to reply to this topic.