OMAP2530 EVM – OGLES Demos Crashing

This topic contains 1 reply, has 2 voices, and was last updated by  CarlosSarria 9 years ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #29613

    jqweezy
    Member

    Hello,

    I have an OMAP2530 EVM and I am trying to run a couple of demos that come with the SDK:

    OGLESEvilSkull
    OGLESShowRoom

    When I first start the demos they seem to be fine, however, shortly after they crash with the following error:

    PVRShell: EGL 1.2 initialized
    Unhandled fault: external abort on non-linefetch (0x008) at 0x404b4e78
    FreeDeviceMemCallback
    FreeDeviceMemCallback
    FreeDeviceMemCallback
    FreeDeviceMemCallback
    FreeDeviceMemCallback
    FreeDeviceMemCallback
    FreeDeviceMemCallback
    FreeDeviceMemCallback
    FreeDeviceMemCallback
    FreeDeviceMemCallback
    FreeDeviceMemCallback
    FreeDeviceMemCallback
    FreeDeviceMemCallback
    RecoverSystemSurfaceCallback
    omaplcd_ddc_swaptosystem : 166   Shutting Down!!!
    Bus error

    Any ideas on why this happens? I appreciate any help you can give.

    Regards,
    JQ

    #32411

    Hello,

     

    We do not have a OMAP2530 EVM but we do have OMAP2430s, which I believe should be very similar. We have never seen a problem like the one you describe above.

    This might be a bug in the drivers so you should get back to your supplier.

    TI is responsible for the drivers on this platform.

     

    Regards.

     

    Carlos.
Viewing 2 posts - 1 through 2 (of 2 total)
You must be logged in to reply to this topic.