Opencv with Opencl on power VR series 6 GPUs

This topic contains 1 reply, has 2 voices, and was last updated by  PaulL 2 years, 9 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #31975



    Does any of power VR series 6 GPUs are validated with Opencv with Opencl libraries ?

    If so , Can you suggest me which development board is enough to run Opencv with Opencl ?

    What is the maximum work group size with power VR series 6 GPUs ?




    We have not directly contributed to OpenCV OpenCL acceleration, and I’m not aware of any OpenCV work done for Rogue, so I can’t comment further in that regard.

    For OpenCL development, we would recommend the Dell Venue 8. However, as above, I’m unaware if a Rogue accelerated OpenCV implementation has been developed.

    The maximum work group size should be queried per device. You can use the OpenCL API function: clGetDeviceInfo() with the parameter CL_DEVICE_MAX_WORK_GROUP_SIZE.

Viewing 2 posts - 1 through 2 (of 2 total)
You must be logged in to reply to this topic.