UBIFS mount issue

Tagged: ,

This topic contains 4 replies, has 2 voices, and was last updated by  Amit 1 year, 5 months ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #53691

    Amit
    Member

    Hello,
    I have created a new ubifs.img by cross-compiling the source code. By following instructions from https://github.com/IMGCreator/openwrt/README.md I have flashed the NAND firmware1 partition with the new ubifs.img and set boot_paratiotion parameter to 1. However, during boot I get the following error

    VFS: Cannot open root device “ubi0:rootfs” or unknown-block(0,0): error -19.

    I have also attached the log file.

    Please let me know what I am doing wrong here.

    Regards,
    Amit.

    Attachments:
    You must be logged in to view attached files.
    #53701

    Hi Amit,

    Which of the NAND flash methods did you use, was it in u-boot with USB/TFTP or did you flash from within OpenWrt?

    Thanks,

    Matt

    #53702

    Amit
    Member

    Hi Matt,
    I have used the method described in https://github.com/IMGCreator/openwrt/README.md from U-Boot using the tftp method.

    Regards,
    Amit.

    #53708

    Hi Amit,

    We’re looking into what may have gone wrong, but it could be one of many different things. Could you please try following the instructions for flashing NAND from within OpenWrt (from the same document)? That page has been updated recently so be sure to refresh it if you have left it open. If you flash the partition from there and it still does not work, it points to it being a problem with the image itself rather than the NAND flash mechanism.

    Thanks,

    Matt

    #53709

    Amit
    Member

    Thanks Matt for your reply. Will try out one more time and let you know.

Viewing 5 posts - 1 through 5 (of 5 total)
The forum ‘Creator Platforms’ is closed to new topics and replies.